Samsung J600G Frp Remove U2 U3 COMBINATION Firmware
Samsung J600G Frp Remove U2 U3 COMBINATION Firmware
If you are looking for a way to remove the FRP (Factory Reset Protection) lock on your Samsung J600G device, you may have come across the term "COMBINATION Firmware". In this article, we will explain what is COMBINATION Firmware, how to use it, and where to download it for different binary versions of Samsung J600G.
Download: https://ssurll.com/2w3Ys2
What is COMBINATION Firmware?
COMBINATION Firmware is a special firmware file that is used to test and debug the hardware and software features of Samsung devices. It can also be used to bypass the FRP lock and other security features on Samsung devices. COMBINATION Firmware is not meant for normal use, as it may cause some issues or damage to your device. It is only recommended for advanced users who know what they are doing.
How to use COMBINATION Firmware?
To use COMBINATION Firmware, you need to flash it on your Samsung device using a tool called Odin. Odin is a Windows-based program that allows you to flash firmware files on Samsung devices. You can download Odin from [here].
Before you flash COMBINATION Firmware, you need to download the correct file for your device model and binary version. The binary version is the number after the letter U in the firmware name. For example, J600GDXU4ASG1 has a binary version of 4. You can check your device's firmware name by going to Settings > About phone > Software information > Build number.
You can download the COMBINATION Firmware files for Samsung J600G from [here]. Make sure you choose the file that matches your device's binary version. For example, if your device has a binary version of 3, you need to download COMBINATION_FAC_FA80_J600GDXU3ARH5.
After you download the COMBINATION Firmware file, you need to extract it using a tool like WinRAR or 7-Zip. You will get a file with the extension .md5 or .tar. If you get a file with the extension .md5, you need to rename it to .tar.
Next, you need to put your device in Download mode. To do this, turn off your device and press and hold Volume Down + Home + Power buttons together for a few seconds. You will see a warning screen. Press Volume Up to continue.
Now, connect your device to your computer using a USB cable. Launch Odin and make sure it detects your device. You will see an ID:COM port number in blue.
In Odin, click on the BL button and select the COMBINATION Firmware file that you extracted earlier. Make sure only Auto Reboot and F. Reset Time options are checked in Odin.
Click on Start and wait for Odin to flash the COMBINATION Firmware on your device. You will see a PASS message in green when it is done.
Your device will reboot automatically and enter Factory Binary mode. You will see a yellow text on the top left corner of the screen.
How to remove FRP lock using COMBINATION Firmware?
After you flash the COMBINATION Firmware on your device, you can remove the FRP lock using one of the following methods:
Method 1: Go to Settings > Developer options and enable OEM Unlock option. Then go back to Settings > Backup and reset and do a Factory data reset. Your device will reboot and erase all data. The FRP lock will be removed.
Method 2: Go to Settings > About phone and tap on Build number 7 times to enable Developer options. Then go back to Settings > Developer options and enable USB Debugging option. Connect your device to your computer and run a tool like [Samsung FRP Helper] or [FRP Hijacker]. Follow the instructions on the tool to remove the FRP lock.
Method 3: Go to Settings > System > Date and time and change the date to 01/01/2019. Then go back to Settings > System > About phone > Software information and tap on Build number 7 times to enable Developer options. Then go back to Settings > System > Developer options and enable OEM Unlock option. Then go back to Settings > System > Date and time and change the date to the current date. Then go back to Settings > System > Backup and reset and do a Factory data reset. Your device will reboot and erase all data. The FRP lock will be removed.
How to flash stock firmware after removing FRP lock?
After you remove the FRP lock using COMBINATION Firmware, you need to flash the stock firmware on your device to restore it to normal mode. You can download the stock firmware files for Samsung J600G from [here]. Make sure you choose the file that matches your device's binary version.
After you download the stock firmware file, you need to extract it using a tool like WinRAR or 7-Zip. You will get four files with the extensions .md5 or .tar.
Next, you need to put your device in Download mode again. To do this, turn off your device and press and hold Volume Down + Home + Power buttons together for a few seconds. You will see a warning screen. Press Volume Up to continue.
Now, connect your device to your computer using a USB cable. Launch Odin and make sure it detects your device. You will see an ID:COM port number in blue.
In Odin, click on the BL button and select the BL file that you extracted earlier. Then click on the AP button and select the AP file. Then click on the CP button and select the CP file. Then click on the CSC button and select the CSC file. Make sure only Auto Reboot and F. Reset Time options are checked in Odin.
Click on Start and wait for Odin to flash the stock firmware on your device. You will see a PASS message in green when it is done.
Your device will reboot automatically and enter normal mode. You will see a welcome screen. You can set up your device as usual.
Conclusion
In this article, we have explained what is COMBINATION Firmware, how to use it, and where to download it for different binary versions of Samsung J600G. We have also shown you how to remove the FRP lock using COMBINATION Firmware and how to flash the stock firmware after removing FRP lock. We hope this article was helpful for you. If you have any questions or comments, please feel free to leave them below.